PowerElectronics Solutions

PowerElectronics Solutions

Many areas of modern industry have huge energy requirements, which must be monitored and regulated. For example, heating systems in coating plants, industrial furnaces, the melting of silicon crystals or lifting magnets for scrap recycling – high-efficiency power supplies are required everywhere.

REO strives for the efficient conversion of energy - in both the inductive and electronic sectors - and guarantees the highest quality and reliability in power supplies with the REOTRON range.

Whether single and three-phase power controller or complete power supplies with transformer, harmonics filter and power factor correction – REO AG offers system solutions for the power supply and control element. 

  • REOTRON SMP-ESM

    19“ Plug-In module

    REOTRON SMP-ESM
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-KMA

    Installation on mounting wall

    REOTRON SMP-KMA
    • Output voltage: 10 - 50 V
    • Output Current: 2 - 7,5 A
    • Output power: 20 - 200 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-KMB

    Installation on mounting wall

    REOTRON SMP-KMB
    • Output voltage: 20 - 80 V
    • Output Current: 10 - 50 A
    • Output power: 200 - 1600 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-LM

    Benchtop

    REOTRON SMP-LM
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-SMB

    Installation on mounting wall

    REOTRON SMP-SMB
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  1. Page:
  2. 1
  3. 2

Downloads