VibratoryFeeding Solutions

VibratoryFeeding Solutions

The electromagnetic vibratory feeder or conveyor offers many benefits to conventional conveyor designs and is particularly used for conveying food, pharmaceuticals and aggregate materials.

Whether alignment, collecting, handling, degreasing, dewatering, distribution, lifting, loading, sorting or splitting of the transported material, the vibration feeding system allows the automation of many processing steps in an efficient and precise manner.

REO AG has supported manufacturers of vibratory feeding solutions for over 20 years and is today the worldwide market leader of the REOVIB range of control units.

REO are complete vibration system solution providers developed with long standing market experience unique combination of inductive and electronic divisions. Whether for bowl, linear or hoppers feeders - REO offers the suitable system solution – from the controller to vibration magnets and measurement systems too.  

  • REOVIB Accelerometers SW

    IP 54, IP 65 - Die-cast aluminum

    REOVIB Accelerometers SW
    • Frequency range: 30 - 150, 10 - 60, 5 - 20 Hz
    • Measurement signal: 100 - 2000 mV/g

    Sensor for measuring accelerations in the range of 0 ... 35 g (frequency dependent). The sensor includes a piezoelectric element with a downstream amplifier acceleration . The accelerations are detected by the piezoelectric element and converted into a voltage proportional to the acceleration.


    The amplifier takes the measurement signal in a form of 100 /150/ 300 /600/ 2000 mV / g. All components are housed in a robust aluminum housing and completely sealed. The electrical connection is via a 4-wire (or 3 -wire), shielded cable. The shield must be grounded at the signal processing device .


     Applications



    • Control and monitoring of conveyor drives

    • Detection of mechanical vibrations

    • Monitoring of acceleration or braking action

  • REOVIB MFS 158

    IP 54 or IP 20, frequency-control

    REOVIB MFS 158
    • Output voltage: 20 - 100 / 40 - 210 V
    • Output Current: max 4 A
    • Input voltage auto detect: 110 /230 V

    Frequency converters in the REOVIB MFS 158 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - completely independently of the mains input frequency.


    In addition, various sensor and valve logic links can be programmed.


     Devices in the REOVIB MFS 158 series are available with a max. output current of 4A, as IP20 versions for installation in control cabinets, and as IP54 standalone versions.


    IP 54 available with:




    • Input cable/output socket




    • Complete cable connection solution for mains, output and control connections



  • REOVIB MFS 168

    IP 54 or IP 20, frequency-control with automatic detection of the resonant frequency

    REOVIB MFS 168
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    Frequency controllers in the REOVIB MFS 168 range for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - independently of the mains input frequency.


    It is also possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude accordingly. In addition, various sensor and valve logic links can be programmed.


    Devices in the REOVIB MFS 168 series are available with a max. output current of 3A, 6A and 8A and as IP20 versions for installation in control cabinets or as IP54 standalone units. 


    The IP54 housings are available with:



    • Input cable/output socket

    • Complete cable connection solution for mains, output and control connections 


     


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     

  • REOVIB MFS 268

    IP 54 or IP 20, Frequency-control with automatic detection of the resonant frequency

    REOVIB MFS 268
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    Frequency converters in the REOVIB MFS 268 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - completely independently of the frequency of the electrical mains supply. 


    It is moreover possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude to constant values. In addition, various sensor and valve logic links can be programmed. Devices can optionally be equipped with field bus interfaces, and are also available as versions with UL/CSA certification. 


    Devices in the REOVIB MFS 268 series are available with a max. output current of 3A, 6A and 8A as IP20 versions for installation in switch cabinets, and also as IP54 case designs.


     


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     

  • REOVIB MFS 268 HP

    IP 54 oder IP 20, high-power version

    REOVIB MFS 268 HP
    • Input voltage: 115 / 230, 230 / 400 V
    • Output voltage: 0 - 100 / 0 - 205 / 0 -360 V
    • Output Current: max 32 A

    REOVIB MFS 268 HP


    High-power version of the REOVIB MFS 268 frequency-control device, can be used for mains voltages of 400 V with max. 8 or 16A output current and for mains voltages of 230 V with max. 


    12, 16, 32A output current. Available as IP20 versions for installation in control cabinets and also as IP54 standalone units for 230 V and 12/16A.


    We are also delighted to offer you a suitable control cabinet system with client specific requirements.Special designs of the REOVIB MFS 268 HP can also be implemented if required.

  • REOVIB MFS 268-LCD

    IP 54, Frequency-control with LC-Display

    REOVIB MFS 268-LCD
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    REOVIB MFS 268-LCD are fitted with an LCD display. The full-text display in various languages makes programming and adjustment easy and intuitive. Important status indications and settings can easily be input and retrieved.


    Frequency converters in the REOVIB MFS 268 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - completely independently of the frequency of the electrical mains supply. 


    It is moreover possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude to constant values. In addition, various sensor and valve logic links can be programmed. Devices can optionally be equipped with field bus interfaces, and are also available as versions with UL/CSA certification. 


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     


     

  1. Page:
  2. 1
  3. 2
  4. 3
  5. 4

Downloads

  • Download
    REOVIB Knowledge
    pdf 4.00 KB

    REOVIB Knowledge

    All about vibratory feeding
    Download
  • Download
    Series_Smart
    pdf 4.00 KB

    Series_Smart

    Guideline for REOVIB Smart Phase-angle controllers
    Download
  • Download
    Series_RTS
    pdf 4.00 KB

    Series_RTS

    Guideline for REOVIB RTS Phase-angle controllers
    Download
  • Download
    Series_MTS
    pdf 4.00 KB

    Series_MTS

    Guideline for REOVIB MTS Programmable Phase-angle controllers
    Download
  • Download
    Series_MFS
    pdf 4.00 KB

    Series_MFS

    Guideline for REOVIB MFS Frequency converters
    Download
  • Download
    REOVIB product catalogue
    pdf 4.00 KB

    REOVIB product catalogue

    Solutions for your vibratory conveyors
    Download
  • Download
    REOVIB AC-Magnets catalogue
    pdf 4.00 KB

    REOVIB AC-Magnets catalogue

    Product catalogue for AC-Magnets
    Download
  • Download
    REODATA - fieldbus communications solutions
    pdf 4.00 KB

    REODATA - fieldbus communications solutions

    REODATA - REO fieldbus communications solutions
    Download
  • Download
    REOVIB LCD
    pdf 4.00 KB

    REOVIB LCD

    New LCD display technology for digital thyristor and frequency control devices
    Download
  • Download
    REOVIB SWM4000
    pdf 4.00 KB

    REOVIB SWM4000

    Handheld measuring instrument for vibratory conveyor equipment
    Download