Download PDF
Your contact: +49 - 212 8804-0 • info@reo.de

REOTRON EW 509

Thyristor power regulator

REOTRON EW 509

Unique Selling Point


  • Mains voltage compensation
  • Selectable vibrating frequency 50/100 Hz or 60/120 Hz
  • Enable input 24 VDC or contact
  • Snap-on mounting for 35 mm DIN rail
  • Control input for track control using the REOVIB 513

Description


The range of REOVIB System 500 modules comprises phase-angle controllers for vibratory feeders and a timer module used with systems that have track control.
The REOVIB 509 is designed for controlling bowl or linear feeders up to 15 A current rating. The output frequency 50Hz/100Hz (60Hz/120Hz) is selected to suit the feeder. In the regulation circuit there is built-in compensation for mains variations. The feed rate setpoint can be derived from a potentiometer, a voltage signal 0...+10 VDC or a current signal 0...20 mA. The setpoint range can be linearised by means of two trimmers Umin/Umax.

Furthermore, an enable input is provided for start/stop operation and there is a control input for use with a track control module (REOVIB 513).
Fixings are provided for DIN rail mounting according to EN 50022-35.

Technical Data


  • Input voltage : 230 / 400 V + 6% / - 10%
  • Output voltage : 0...Ue V
  • Output Current : 15 A
Your contact: +49 - 212 8804-0 • info@reo.de

REOTRON EW 509

Thyristor power regulator

Technical data

Type

REOTRON EW 50

Input voltage:

230 V, + 6% / - 10%, 50/60 Hz

400 V, + 6% / - 10%, 50/60 Hz

Output voltage:

0...230 V

0...400 V

Output current:

15 A

Setpoint:

external with 0...+ 10 V, DC
0(4)...20 mA, Potentiometer 10 kΩ

Release:

24 V, DC or contact

Start relay:

Changer 250 V, 1 A

Operating temperature:

0...+ 45 °C

Protection:

IP 20

 

 

Dimension drawing

 

Type

a
[mm]

b
[mm]

c
[mm]

d
[mm]

EW 509

150

74

112

100