DC-Power supplies

REOTRON SMP - the variable DC power supply from REO

The REOTRON SMP switching power supply provides a safe, stable and adjustable power supply for use in process engineering systems and guarantees the highest level of quality.

The DC power supplies from the REOTRON SMP series are primary switched switching power supplies with galvanic isolation from the input to the output. The devices can be used as voltage, current or power regulators.

  • REOTRON SMP-ESH

    REOTRON SMP-ESH
    • Output voltage: 10 - 80 V
    • Output Current: 10 - 60 A
    • Output power: 200 - 1400 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-ESM

    19“ Plug-In module

    REOTRON SMP-ESM
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-KMA

    Installation on mounting wall

    REOTRON SMP-KMA
    • Output voltage: 10 - 50 V
    • Output Current: 2 - 7,5 A
    • Output power: 20 - 200 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-KMB

    Installation on mounting wall

    REOTRON SMP-KMB
    • Output voltage: 20 - 80 V
    • Output Current: 10 - 50 A
    • Output power: 200 - 1600 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-LM

    Benchtop

    REOTRON SMP-LM
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

  • REOTRON SMP-SMB

    Installation on mounting wall

    REOTRON SMP-SMB
    • Output voltage: 25 - 600 V
    • Output Current: 2 - 600 A
    • Output power: 1000 - 15000 W

    The REOTRON SMP power supplies are primary switched power supplies with galvanic separation from the input to the output. They can be used as voltage, current or power regulators.


    Operation
    The unit can be operated from an internal display, external control signals of 0…+10V, 0(4)…20mA or optionally by a fieldbus interface such as DeviceNet, ProfiBus, CanBus, EtherCAT, EtherNet/IP and ProfiNet protocols.


    Input devices
    The device input is designed for connection to a three-phase mains 3 x 400 V, 50/60 Hz. The compliance of EMC standards is guaranteed by an input-sided PFC-mains filter.


    Design
    The devices have a compact design in a 19 inch rackmount chassis and can be delivered as a installation ready control cabinet version or as a tabletop unit (lab version). The devices are air- or water-cooled.


    Connection
    The SMP‘s are connected via screw terminals and with cooper terminal buses at high output currents. Like all REO-products, the REOTRON SMP‘s are also available as customized versions.


    High range of performance
    The units can be combined to power supplies with higher ratings by connecting the units in series or parallel.

Downloads