de

New Products

  • REOVIB MFS 168

    IP 54 or IP 20, frequency-control with automatic detection of the resonant frequency

    REOVIB MFS 168
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    Frequency controllers in the REOVIB MFS 168 range for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - independently of the mains input frequency.


    It is also possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude accordingly. In addition, various sensor and valve logic links can be programmed.


    Devices in the REOVIB MFS 168 series are available with a max. output current of 3A, 6A and 8A and as IP20 versions for installation in control cabinets or as IP54 standalone units. 


    The IP54 housings are available with:



    • Input cable/output socket

    • Complete cable connection solution for mains, output and control connections 


     


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     

  • REOVIB MFS 268-LCD

    IP 54, Frequency-control with LC-Display

    REOVIB MFS 268-LCD
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    REOVIB MFS 268-LCD are fitted with an LCD display. The full-text display in various languages makes programming and adjustment easy and intuitive. Important status indications and settings can easily be input and retrieved.


    Frequency converters in the REOVIB MFS 268 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - completely independently of the frequency of the electrical mains supply. 


    It is moreover possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude to constant values. In addition, various sensor and valve logic links can be programmed. Devices can optionally be equipped with field bus interfaces, and are also available as versions with UL/CSA certification. 


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     


     

  • REOLAB 1000 E

    Electronic DC Power Supply

    REOLAB 1000 E
    • Input voltage: 3 x 400 V, +/- 10 % V
    • Output Current: 60 A
    • Rated power: 0 - 150 kW/kVA

    The new REOLAB 1000 E is an electronic DC supply designed for lab and test operation.
    Precise and stepless voltage and current values can be internally and externally predefined. Long-term tests can be programmed via profiles and logged via internal logic.

    Operation
    All parameters can be set and correspondingly read off by means of a large LCD panel.


     


     

  • Series IE modular

    closed-loop current transformers

    Series IE modular
    • Primary rated current: 500 - 2500 A
    • Umgebungstemperatur: -25... +70 °C
    • Frequency range: 50... -400 Hz

    In the case of bushing-type current transformers, the customer’s primary wire is pushed
    through the current transformer opening in the housing. The push-through opening depends
    on the size of the primary current.
    Wound primary type current transformers have a primary winding and a secondary winding.
    Both windings are applied on the closed toroidal core and are isolated from each other by
    insulation. This principle applies mainly where primary currents are small. Low-voltage current
    transformers for the proportional transformation of large currents to directly measurable
    smaller current values.

    According to: EN/IEC 61869-1/2
    Primary rated current: 500, 1000, 2500 A
    Frequency range: 50 - 400 Hz

    Applications:



    • Industry

    • Renewable energy sources

    • Railway engineering

    • Energy, automation and building technology

  • Series WKO-2C-B

    Double core technology closed-loop current transformers for railway engineering

    Series WKO-2C-B
    • Primary rated current: 500 - 2000 A
    • Messbereich: 0...3000 A
    • Frequency range: 120000 Hz

    The current transducer WKO-2C-B with hall effect elements and double-core  technology has an extended frequency response up to 150 kHz and an accurate phase response. The WKO-2C-B guarantees an increased current measurement accuracy better than 0.3% in the whole frequency range: DC to 150 kHz.


    A completely redesigned electronics ensures that the new C/L current transducer has better drift compensation and an extended temperature range from -40°C to 85°C.


    Modular design


    The current transformer has a modular design which allows a variety of mounting options. The cost-effective basic model consists of a housing with screw terminals, bushing for cable and holes for fixing. Optionally, the transducers are available with mounting kit for busbars, molex connectors and feets for horizontal or vertical mounting.


    According to: 



    • EN 50178:1997

    • UL 94-V0

    • EN 50178            

    • EN 50155:2007

    • IEC 61373:2010


    Typical applications



    • Railway engineering

  • REOVIB MFS 268

    IP 54 or IP 20, Frequency-control with automatic detection of the resonant frequency

    REOVIB MFS 268
    • Output voltage: 0 - 100 / 0 - 205 V
    • Output Current: max 3/6/8 A
    • Input voltage auto detect: 110 / 230 V

    Frequency converters in the REOVIB MFS 268 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material - completely independently of the frequency of the electrical mains supply. 


    It is moreover possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude to constant values. In addition, various sensor and valve logic links can be programmed. Devices can optionally be equipped with field bus interfaces, and are also available as versions with UL/CSA certification. 


    Devices in the REOVIB MFS 268 series are available with a max. output current of 3A, 6A and 8A as IP20 versions for installation in switch cabinets, and also as IP54 case designs.


     


    Suitable sensor:


     


    REOVIB SW in IP54 design 


     

  1. Page:
  2. 1
  3. 2